MT25408A0-FCC-QI ConnectX, Failed to identify the device - Can not create SignatureManager!

Infrastructure & Networking Software And Drivers Mellanox OFED
1
  1. Network controller: Mellanox Technologies MT25408A0-FCC-QI ConnectX
  2. Ubuntu 20.04.4 LTS 5.4.0-121-generic
  3. Driver from Linux InfiniBand Drivers

After installation

The firmware for this device is not distributed inside Mellanox driver: 01:00.0 (PSID: HP_0180000009)
To obtain firmware for this device, please contact your HW vendor.

mlxfwmanager -d 01:00.0
Querying Mellanox devices firmware …
Failed to identify the device - Can not create SignatureManager!
Failed to identify the device - Can not create SignatureManager!

Device #1:

Device Type: ConnectX2
Part Number: 592520-B21
Description: HP IB 4X QDR CX-2 PCI-e G2 Dual Port HCA
PSID: HP_0180000009
PCI Device Name: 01:00.0
Port1 GUID: 0002c90300096bed
Port2 GUID: 0002c90300096bee
Versions: Current Available
FW 2.9.1000 2.9.1000

Question: Where can I find a driver for my equipment?
It’s an old hardware but I don’t believe the drivers for my card are gone.

2

This is an HP branded product – the firmware images are managed by HP.

Need to approach HPE support for obtaining the firmware.

This may be relevant:

https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_d859112d72c14ec09df80c482e