Hi, I want to hook up Serializer-Deserializer(SerDes) to TX1 CSI port. 3 cameras will be connected to SerDes and data streams of 3 cameras are time-division multiplexed and go into TX1 CSI-0(A+B). SerDes has 4-lane mipi output. As far as I know, in this case, each pixel stream can be distinguish…

Multiple CSI cameras on tx1 and virtual channel id

ShaneCCC March 3, 2017, 8:11am 6

Hi sung-ho
TX1 VI/CSI not support your use case. The only way is post processing to clip it.

Topic		Replies	Views
2 camera streams through 1 CSI port using Virtual Channel concept Jetson TX2	17	7918	August 31, 2021
Xavier NX Virtual Channels Jetson Xavier NX camera	2	862	October 18, 2021
Support for Multiple VC IDs on Single CSI Input with FPGA Aggregator + D3 16-Port FPD-Link Interface on Jetson Xavier Jetson Xavier NX camera	3	45	July 1, 2025
Error with two cameras on single CSI port with vc-id Jetson TX2	7	1167	October 18, 2021
Does TX2 supports MIPI CSI-2 virtual channels without SerDes in JetPack 4.3? Jetson TX2 camera	2	571	October 18, 2021
Virtual Channels Jetson AGX Orin camera	3	68	September 16, 2024
Multiple CSI cameras on tx1 Jetson TX1	14	8514	March 31, 2017
GMSL Virtual Channel ID support Jetson AGX Xavier	3	1265	July 17, 2019
4 cameras to TX2 1X4 lane CSI Jetson TX2	2	831	October 18, 2021
How to capture 4 chans video data through one csi interface based ov5693_i2c driver on jetson tx1 board Jetson TX1	12	2162	October 18, 2021