Network configuration for Conti ARS430RDI

[VickNV]

Please see if the information in the following topic helps.
also, can you capture any packets from it on a host system?

Network configuration for Conti ARS430

Hi guys, I have a problem about connecting Conti 430 radar sensor with AGX. I checked the sensor on host in wireshark: The sensor has the IP 192.168.3.33/24 (Source), Destination 239.192.22.10 and use 31122 port. The eth0:900 which I used from AGX connect with Conti 430 has the IP 10.1.0.81/16. My question: How could I config the route table in AGX to receive the data from the radar sensor due sample_radar_record application? Many thanks! Please provide the following info: **Hardware Plat…