Network Connection using Onyx LTE USB Dongle getting dropped on Jetson Nano

I have been trying to configure cellular network using Onyx LTE USB Dongle by wvdial. When I connect the dongle, I am detecting the modem but after 10-20 seconds I am dropping the network connections. When I check in Network Connections >> Mobile Broadband I can see the network name.
This is my lsusb:

Bus 002 Device 002: ID 0bda:0411 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp.
Bus 001 Device 036: ID 0416:c168 Winbond Electronics Corp.
Bus 001 Device 031: ID 413c:2113 Dell Computer Corp.
Bus 001 Device 034: ID 19d2:1557 ZTE WCDMA Technologies MSM
Bus 001 Device 030: ID 04ca:0061 Lite-On Technology Corp.
Bus 001 Device 037: ID 2c7c:0125
Bus 001 Device 029: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 002: ID 0bda:5411 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 037: ID 2c7c:0125 : This is the device.

I have attached dmesg log as dmesg_log.txt for the Product: EG25-G and Manufacturer: Quectel.:

dmesg_log.txt (88.1 KB)

Is there any drivers I am missing or any conflicts with other dependencies? How do I know?
Thank you

I fixed it. I followed [this tutorial] (Soracom Onyx LTE Dongle Setup Guide | SORACOM Developers) (Using WvDial) section and I could able to access internet.

If somehow, network connection is already there, then first delete it and install wvdial option.

1 Like

Good to know issue fixed, thanks for the update.

1 Like