Hi, I am looking to capture video and still images on the Jetson AGX Xavier dev unit using the FRAMOS IMX-485C, FRAMOS IMX-530C, and OmniVision 0S08A20 evaluation modules (Not at the same time). So far I’ve had success in setting up the cameras and properly flashing the AGX Xavier unit, but I am no…

No Cameras Available - MIPI Camera Sensor Evaluation Boards

p.mehta February 10, 2021, 8:44pm 4

I am from FRAMOS. Have you downloaded the FRAMOS software and drivers from : FRAMOS Sensor Modules Downloads ?

You need to apply the patch to Jetpack before flashing your device.

If you still have an issue, please reach out to me on support@framos.com

Thanks,
Prashant

Topic		Replies	Views
Test camera with "gst-launch-1.0" results in "execute:725 No cameras available" Jetson Xavier NX camera , kernel , gstreamer	10	2281	May 18, 2022
Cannot use gstreamer with CSI camera. V4L works fine Jetson AGX Xavier camera	6	434	December 4, 2023
Xavier NX: imx219 csi-camera detected but execute:751 No cameras available Jetson Xavier NX camera , gstreamer	10	1586	December 21, 2022
Gstreamer cannot capture from bayer sensor (imx415) in Jetson nano Jetson Nano camera , kernel , gstreamer	5	1274	October 15, 2021
Error: No camera availabe with "nvarguscamerasrc ...." Jetson Xavier NX	7	1041	October 18, 2021
The v4l2 instruction captures images, but gstreamer does not Jetson Xavier NX camera , gstreamer	5	60	November 28, 2024
Integration of new camera sensor - No cameras available issue Jetson AGX Xavier camera	31	1650	October 18, 2021
Error in nvarguscamerasrc: No cameras available Jetson AGX Xavier	7	2824	October 18, 2021
Camera not streaming while using gstreamer Jetson Xavier NX camera	3	349	October 18, 2021
No cameras available in Xavier NX Jetson Xavier NX camera	11	1786	October 18, 2021