No screen visible after DRIVE AGX reflashing

Please provide the following info (check/uncheck the boxes after creating this topic):
Software Version
DRIVE OS Linux 5.2.6
[V] DRIVE OS Linux 5.2.6 and DriveWorks 4.0
DRIVE OS Linux 5.2.0
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
other

Target Operating System
[V] Linux
QNX
other

Hardware Platform
[V] NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
other

SDK Manager Version
1.7.1.8928
other ( 1.7.2.9007 )

Host Machine Version
[V] native Ubuntu 18.04
other

No HDMI signal from target, after reflashing, and installing ubuntu on target using instructions from https://docs.nvidia.com/drive/drive-os-5.2.6.0L/drive-os/index.html#page/DRIVE_OS_Linux_SDK_NGC_Development_Guide/Interfaces/sys_components_file_ubuntu.html#wwpID0E0GB0HA

section “Installing GUI on the Target”.

Attached is a log from the target:
putty_log.log (85.9 KB)

Problem 1:
The log says

Failed to update the Marvell switch firmware.. Script exited with 1

Problem 2:
No HDMI signal from target

Any ideas?

Documentations in link:
https://docs.nvidia.com/drive/drive-os-5.2.6.0L/drive-os/index.html#page/DRIVE_OS_Linux_SDK_NGC_Development_Guide/Interfaces/sys_components_file_ubuntu.html

says “Choose default display-manager between gdm3 or lightdm: Choose gdm3 and press enter.”
I now chose lightdm and hdmi works.
Consider updating documentation.

Dear @Sunny127,
Thank you for sharing your feedback. It is helpful to others in the community

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.