no wlan0 for Linksys AE1200 wifi dongle

Autonomous Machines Jetson & Embedded Systems Jetson Nano
1

does anyone know the module / package I should look for to get this dongle running? Thanks

[ 1342.124963] tegradc tegradc.0: unblank
[ 1342.146304] tegradc tegradc.0: nominal-pclk:32000000 parent:32000000 div:1.0 pclk:32000000 31680000~34880000
[ 1342.146467] tegradc tegradc.0: hdmi: tmds rate:32000K prod-setting:prod_c_hdmi_0m_54m
[ 1342.207814] tegradc tegradc.0: unblank
[ 1342.207832] tegradc tegradc.1: blank - powerdown
[ 1347.933249] usb 1-2.3: USB disconnect, device number 5
[ 1361.727154] usb 1-2.3: new high-speed USB device number 7 using tegra-xusb
[ 1361.757578] usb 1-2.3: New USB device found, idVendor=13b1, idProduct=0039
[ 1361.758188] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1361.758242] usb 1-2.3: Product: Linksys AE1200
[ 1361.758286] usb 1-2.3: Manufacturer: Cisco
[ 1361.758329] usb 1-2.3: SerialNumber: 000000000001

2

See the registry list:
http://www.linux-usb.org/usb.ids

Within manufacturer 0x13b1 (Linksys) is device ID 0x0039:

0039  AE1200 802.11bgn Wireless Adapter [Broadcom BCM43235]

I have no other knowledge of which chipset driver this might take, but presumably (if no extra firmware is required), then any driver for the Broadcom BCM43235 chipset would work (or one named for the AE1200 adapter).