Not able to detect the I2C slave address for both PEX8714 and SN65DP141Display Port Linear Redriver

Hello,

Jetpack4.4 With TX2i.
In our Custom board, we have hardware both PEX8714 and SN65DP141DisplayPortLinearRedriver.
But not able to see the I2C slave address for both. using (sudo i2cdetect -y -r 0).
We have verified with all connections are properly.
Any help will be greatly appreciated.

Thanks,
Parashuram

Hi,
Please use a oscilloscope to check if the I2C signal fit your request.