Now I can not flash my Orin

Hi Nvidia :

I use JetPack_5.1.1_Linux . but Orin can not run yestaday. So I reflash it.
I use next command:
$ cd Linux_for_Tegra
$sudo ./tools/kernel_flash/l4t_initrd_flash.sh --no-flash jetson-agx-orin-devkit mmcblk0p1
$sudo ./tools/kernel_flash/l4t_initrd_flash.sh --flash-only jetson-agx-orin-devkit mmcblk0p1

now, thease command can not work. The system show next info.

long ago, I download files can flash my orin. but when I upgrade to JetPack_5.1.2.,it not flash my Orin.

please help me ! Thanks.

when I flash 5.1.2, show next wrong.

how can I flash 5.1.2.thanks!

Are you using a AGX Orin devkit or a Orin module on custom carrier board?

Hi,

can you try again with a fresh Ubuntu install on your host PC?
Looks like the APT repository on your host is messed up.

Yes , my board is AGX Orin devikter 64G .

Do you mean I must install APT on my host PC?

我們可能說中文比較好溝通,你的英文我實在看不太懂…

首先第一張圖是你刷完5.1.1之後進系統跳出來的?
可以正常用的話應該就沒差,還是它有問題?
還有你要刷eMMC的話用這個指令就好,不需要initrd flash還分成兩步

sudo ./flash.sh jetson-agx-orin-devkit internal

第二個apt repo的問題我不知道你的電腦是怎麼搞的,但是搜尋一下就有解法了

谢谢您的帮助:
第一个问他是刷机后,在Orin 端弹出的对话框。Orin端 Ubuntu系统安装不成功。
其实,这两条命令,我已经用了好几个月了,一直停稳定的。

第一个问题,和第二个问题。我都会去做的!
再次谢谢您!

重新安裝了PC端 Ubuntu 20.04系統,APT錯誤解決了。謝謝!

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.