Nvanguscamerasrc was unable to turn on the USB camera

Hi!

when i using rtsp server, I can’t turn on the USB camera using nvanguscamerasrc on agx Xavier.

nvidia@nvidia-desktop:~/work-ssd/rtsp-server/gst-rtsp-server-1.14.5/examples$ ./test-launch “( nvarguscamerasrc sensor-id=6 ! video/x-raw, width=1920, height=1080, framerate=30/1 ! nvv4l2h264enc ! h264parse ! rtph264pay name=pay0 pt=96 )”
stream ready at rtsp://127.0.0.1:8554/test
Opening in BLOCKING MODE
GST_ARGUS: Creating output stream
CONSUMER: Waiting until producer is connected…
GST_ARGUS: Available Sensor modes :
Segmentation fault (core dumped)

However, I can use v4l2src to turn on the USB camera。

./test-launch --gst-debug=3 “( v4l2src device=/dev/video6 ! video/x-raw, width=1920, height=1080 ! videoconvert ! x264enc ! h264parse ! rtph264pay name=pay0 pt=96 )”

why?

Dear @darius-yuan,
This forum is intended for DRIVE platform related queries.
Could you please post your queries in relevant Jetson forum (https://forums.developer.nvidia.com/c/agx-autonomous-machines/jetson-embedded-systems/70)

okay!
thank you very much!