thank you for your feedback ,
we disconnect POWER_EN signal connection from MCU and provide Hardware High signal with RC delay . and now NX boot successfully . i think that low pulse give by MCU logic .
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Custom Carrier board Reboot issue for Jetson Xavier NX | 15 | 820 | December 15, 2021 | |
| Board not booting up | 14 | 1982 | December 24, 2021 | |
| Jetson Nx booting at custom main board | 12 | 1347 | October 10, 2021 | |
| Xavier NX boot up failed in custom carrier board | 8 | 699 | October 18, 2021 | |
| Jetson Nx booting at custom main board | 2 | 629 | October 3, 2021 | |
| Jetson Xavier NX not booting in custom carrier board | 16 | 88 | March 12, 2025 | |
| Module not booting correctly on custom carrier board | 25 | 505 | May 17, 2024 | |
| Jetson Xavier NX Flashing Problem | 4 | 1260 | October 18, 2021 | |
| Using X1 Module on Different Embedded Board | 34 | 6010 | December 30, 2016 | |
| SD card detected but unable to boot from SD card | 9 | 65 | February 7, 2025 |