Nvidia Jetson Xavier NX random display issue

Robotics & Edge Computing Jetson & Embedded Systems Jetson Xavier NX
,
1

Hi Team,

Sometimes when we attach DP wire to NV board and try to bring up GUI, randomly sometimes this logs come over. We are able to login through console but still continuosly getting this.

Logs are attached below:

fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
��
Ubuntu 18.04.4 LTS tegra-ubuntu ttyTCU0

tegra-ubuntu login:
Ubuntu 18.04.4 LTS tegra-ubuntu ttyTCU0

tegra-ubuntu login: ��fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
��
Ubuntu 18.04.4 LTS tegra-ubuntu ttyTCU0

tegra-ubuntu login: ��fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004
fmon_self_check: FMON_GPCCLK: detected fault 0x1004

2

Please suggest why these logs are coming
.

5

Team please support. We require your assistance urgently.

6

Hello,

You mentioned “NV board”, so is this issue on nv devkit?
How is the reproduce rate of this error ?

7

Yes.
It produces rarely not frequently.

8

We just want to know the root cause of this error. Because this error produces only 4 times out of 100s testing.

9

Hi,

We will check this issue. It means frequency monitor is seeing limits violation.

11

Thank you.

12

what power supply you are using.
this prints comes when the freq of that particular clock is not what sw is expecting.

13

Hi,

Also, can you share the complete uart log when the issue happens. you may type dmesg to reprint the kernel log after the issue is seen. I am looking for any OC throttle happening when the issue is seen

thanks
Bibek

14

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.
Thanks

Hi ekta.singh,

Could you provide more info then we can investigate this issue?