NVME SSD drive visible in lspci, but not visible in fdisk

NVMe is always connected.

To avoid the i2c error, I’m working without any external device.
After start up the Jetson, I’m waiting 5 minutes, I plug my HDMI screen into the Jetson and I got the log on the image in annex:

To resume :

fstab file

# <file system> 				<mount point>   <type>	<options>	<dump>	<pass>
/dev/root   					/  		ext4 	defaults 	0 	1

#Didn't boot and get the log in the annex image
UUID=3f8579ee-4572-47ab-9763-2d3518828378 	/media/nvme 	ext4 	defaults 	0 	0

#Boot everytime but mounted the NVMe randomly
UUID= <3f8579ee-4572-47ab-9763-2d3518828378> 	/media/nvme 	ext4 	defaults 	0 	0

/boot/extlinux/extlinux.conf

LABEL primary
      MENU LABEL primary kernel
      LINUX /boot/Image
      INITRD /boot/initrd
      APPEND ${cbootargs} pci=nomsi pcie_aspm=off quiet usbcore.usbfs_memory_mb=1000