Please provide the following info (check/uncheck the boxes after clicking “+ Create Topic”):
DRIVE OS Linux 188.8.131.52
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
Target Operating System
NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
SDK Manager Version
Host Machine Version
native Ubuntu 18.04
Hello nVIDIA experts,
I need to build a demonstration system with nVIDIA Drive AGX and a GMSL2 sink. The GMSL2 sink is propriatery HW, nothing you can buy on the market. And it is not a camera. However I’m familiar with GMSL2 and I have all datasheets and information about the GMSL2 Serializer. I know how to set up GMSL2 links, I know how to set up the sink, including the Serializer side of the GMSL2 link.
We plan to use nvmimg_cc for the demonstration.
I have been able to start the Deserializer on AGX in GMSL2 mode and establish a connection to the sink (a GMSL2 serializer). I have positive VIDEO_LOCK status and no errors or overflows in the AGX Deserializer. But nvmimg_cc times out, indicating that it does not see any CSI Frame Start/Frame End packets.
The configuration scripts I have seen in ddpx-a use the AGX deserializer all use GMSL1 mode.
So my main question:
Is there an example configuration script that shows how to set up the AGX deserializer in GMSL2 mode which I can take as a reference? If yes, where can I find it or how can I get it?