sudo ./flash.sh -r -k kernel-dtb jetson-xavier-nx-devkit-emmc mmcblk0p1 After flash complete, I can see the Nvidia Logo and after that black screen with a blinking cursor: This is the UART boot log: . . . . . [0002.252] I> Hit any key to stop autoboot: 4 3 2 1 [0004.26…

Hi, It looks like I used the wrong DTB. We are developing camera drive for the NX. The resulted DTB is : tegra194-p3668-p3509-0000.dtb And that’s the one that caused the NX to halt during boot. Once I have changes the dtb to: tegra194-p3668-all-p3509-0000.dtb and flash using this command: s…

NX does not boot after flashing DTB only

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

gtj June 23, 2020, 7:18pm 2

Related issue:

The only way to currently flash is to flash everything (except the system image)

$ sudo ./flash.sh -r --no-systemimg jetson-xavier-nx-devkit-emmc mmcblk0p1