# Nx platform：system bringup issue!

**URL:** <https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541>\
**Category:** Jetson Xavier NX\
**Tags:** boot, board-design\
**Created:** [December 25, 2020, 12:56pm UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541 "2020-12-25T12:56:15Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![lmmhu](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@lmmhu](https://forums.developer.nvidia.com/u/lmmhu)\
**Post date:** [December 25, 2020, 12:56pm UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/1 "2020-12-25T12:56:16Z")

</div>

hello,when i download standard sdk image from jetson download centor to our self-designed pcba,the system startup abnormally,and the pcba device automatically reboot continuously,i don’t know what happened and what problem with the pcba!  
the hdmi have some output on the screen,but a few second later,the screen go dark.  
the uart debug log is in the attachement.  
[system-bringup.log](https://forums.developer.nvidia.com/uploads/short-url/xBm51QzpVRP9EtiU1u3C0ZS083k.log) (113.8 KB)

---

<div class="post-metadata">

**Author:** ![lmmhu](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@lmmhu](https://forums.developer.nvidia.com/u/lmmhu)\
**Post date:** [December 25, 2020, 12:58pm UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/2 "2020-12-25T12:58:26Z")

</div>

rootfs version is R32.4.4

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [December 28, 2020, 2:21am UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/4 "2020-12-28T02:21:56Z")

</div>

Hi,

Sorry for late reply. I am confused by your image here.

> standard sdk image from jetson download centor

What standard sdk image do you use here? Could you point out the link for me?

---

<div class="post-metadata">

**Author:** ![lmmhu](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@lmmhu](https://forums.developer.nvidia.com/u/lmmhu)\
**Post date:** [December 29, 2020, 3:38am UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/5 "2020-12-29T03:38:30Z")

</div>

We solved the problem，so please close this post!thank you!

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [December 29, 2020, 3:39am UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/6 "2020-12-29T03:39:45Z")

</div>

Could you give a brief comment to tell us what was the cause of your problem?

This may also help other users who have similar problem.

---

<div class="post-metadata">

**Author:** ![lmmhu](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@lmmhu](https://forums.developer.nvidia.com/u/lmmhu)\
**Post date:** [December 29, 2020, 7:28am UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/7 "2020-12-29T07:28:04Z")

</div>

when we burned system image to our nx pcba board,the system did not enter ubuntu desktop,not only enter uart commandline,duo to our HDMI ddc and hpd problem,there are two solution:  
1.hardware solution: disconnect ddc and hpd,then the system enter uart commandline.In uart commandline mode,we set username and passwd,and then we reconnect ddc and hpd,the system can enter ubuntu desktop.  
2.software solution: set default username and passwd,with autologin = true,and then system can enter ubuntu desktop.  
that’s all ,thank you !

---

<div class="post-metadata">

**Author:** ![lmmhu](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@lmmhu](https://forums.developer.nvidia.com/u/lmmhu)\
**Post date:** [January 21, 2021, 7:28am UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/10 "2021-01-21T07:28:55Z")

</div>

no,we fix it!  
as follow:  
1.hardware solution: disconnect ddc and hpd,then the system enter uart commandline.In uart commandline mode,we set username and passwd,and then we reconnect ddc and hpd,the system can enter ubuntu desktop.  
2.software solution: set default username and passwd,with autologin = true,and then system can enter ubuntu desktop.

---

<div class="post-metadata">

**Author:** ![nadeemm](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/nadeemm/32/367020_2.png) [@nadeemm](https://forums.developer.nvidia.com/u/nadeemm)\
**Post date:** [October 18, 2021, 6:42pm UTC](https://forums.developer.nvidia.com/t/nx-platform-system-bringup-issue/164541/12 "2021-10-18T18:42:21Z")

</div>

Closed on October 18, 2021, 6:42pm UTC


