Copied the files from the Auvidea firmware inside the Linux_for_Tegra and then ./apply_binaries.sh
Flashed Jetson Production module on DevKit carrier board: sudo ./flash.sh jetson-nano-emmc mmcblk0p1
In Auvidea JN30B I could only see the IMX219 camera in port CSI-AB.
How could I enable the other three ports on JN30B?
Hi robert.dragomir,
I don’t have experience with Auvidea JN30B, thus can’t answer it, you may need to contact with Auvidea support to have the proper suggestions.