Orin MBGE report error

[mmcly]

Hi, NV team
Recently,we meet a issue with our Orin 32G module, the main problem lies in the 10GbE network connection, which often fails to establish and I can’t ping the orin with MBGE. The error messages I saw through the debug port are as follows.

I have tried replacing the board , but the issue persists. The corresponding MBGE port on the Orin module is still problematic, and sometimes it even fails to connect at all. I have also tried reflashing the program on the Orin module, but there has been no improvement. I believe there is a problem with this Orin module on hardware . Do you have any suggestions?

[WayneWWW]

Please put your module on NV devkit and flash with latest BSP and see if you can still reproduce this issue.

[mmcly]

we don’t have devkit on hand , we just have the module on our custom board. and just as I mention above， I have change another board and the issus follow with the orin module。 And our board has been test as a stable version， and We have already utilized over 100 board at our project site.

[WayneWWW]

Sorry, we could only guarantee RMA based on NV devkit test result.

You could contact your local distributor for the return.