Orin Nano After Flashing GUI not showing

We are planning to use Vision Components imx568 camera in jetson orin nano, but we are doing flash via the “9-support-for-jetson-orin-nano” branch found here https://github.com/VC-MIPI-modules/vc_mipi_nvidia, but there is no image on the screen. We can connect with minicom. How can we fix this problem? We don’t have the cameras at the moment.

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.

hello kes.ici0619,

please gather complete UART logs for reference,
we may dig into bootloader logs and also kernel init messages to dig into the root cause.