Orin Nano Devkit showing error during boot

Hi Nvidia team. I’m using Jetson Orin Nano devkit 8Gb and L4T version R35.4.1.
I’m trying to enable secureboot + UEFI secure boot + disk encryption. I was able successfully to flash to device without error. However I have faced the issue during device bootup. (Log attached)
Here is my step to flash it.

  1. sudo ./tools/kernel_flash/l4t_initrd_flash.sh --network usb0 -u ./rsa.pem -v ./sbk.key --no-flash --showlogs -p “-c bootloader/t186ref/cfg/flash_t234_qspi.xml” jetson-orin-nano-devkit internal
  2. sudo ROOTFS_ENC=1 ./tools/kernel_flash/l4t_initrd_flash.sh --showlogs -u ./rsa.pem -v ./sbk.key --no-flash --external-device nvme0n1p1 --uefi-keys uefi_keys/uefi_keys.conf -i ./sym2_t234.key -c ./tools/kernel_flash/flash_l4t_t234_nvme_rootfs_enc.xml --external-only --append --network usb0 jetson-orin-nano-devkit external
  3. sudo ./tools/kernel_flash/l4t_initrd_flash.sh --showlogs -u rsa.pem -v sbk.key --network usb0 --flash-only

So, I don’t know am I missing any steps or fail something? Please help me take a look on it.

Thank you

log.txt (254.1 KB)

There is no update from you for a period, assuming this is not an issue any more.
Hence we are closing this topic. If need further support, please open a new one.
Thanks

Hi anhhao.hcmus,

It seems there are many CBB errors in your serial console log during boot up.
Could you share the log of each step to flash the board?