Hi team I have flashed my orin Nano using the Jetpack 5.1.1 SDK and the device boots up with the HDMI. But when connecting the micro B cable, its not getting detected in my laptop I am using a custom carrier board that i was using for xavier NX. The setup is good as i try with orin NX or any other…

Orin Nano ssh is not avilable after flashing

Robotics & Edge Computing Jetson & Embedded Systems Jetson Orin Nano

DaveYYY May 24, 2023, 8:39am 7

Yes, we just tested with our Orin Nano DevKit, and it was working fine.
If the connection is established successfully, there should be a device with IP: 192.168.55.100 on your host, and 192.168.55.1 on your device. Can you check that?

Topic		Replies	Views
Jetson orin nano minimal rootfs ssh Jetson Orin Nano security , networking	7	273	May 22, 2024
Issue SSH-ing into Orin Nano Jetson Orin Nano networking	2	84	October 4, 2024
Jetson Nano Orin cannot open after reboot Jetson Orin Nano boot	6	417	July 2, 2023
Jetson Orin Nano stopped working Jetson Orin Nano	21	104	July 29, 2025
Can not flash Orin Nano, failed to expose SSH Jetson Orin Nano reflash	2	685	September 18, 2023
SSH problem in Jetson Orin Nano Jetson Orin Nano networking	2	343	February 5, 2024
Bootloader or fullimage flashing failed Jetson Orin Nano flash	26	479	April 24, 2024
Can't Flash Jetson Orin Nano - SSH Server Never Starts Jetson Orin Nano reflash	28	501	July 17, 2024
Jetson Orin Nano Headless setup ready to SSH Jetson Orin Nano ubuntu	18	3843	January 30, 2024
Jetson Orin board bricked after updating to jetpack 6.1 Jetson Orin Nano jetson	17	149	January 11, 2025

Orin Nano ssh is not avilable after flashing

Related topics