Orin nx模块软关机 底板硬件如何设计问题

Autonomous Machines Jetson & Embedded Systems Jetson Orin NX
,
1

当前我们用ORIn NX 16GB模块配合我们自己开发的硬件底板，系统正常启动后再用鼠标点软件关机按钮，显示器灭了 ，但工作电流还是有600mA左右，两分钟后显示屏又正常工作了。（系统整个过程应该是没有关掉）
请问底板硬件设计时需要对Orin NX哪些引脚做必要处理 ， 以正常实现此软件关机功能

3

Please refer to the Design Guide and check your power off sequence.

5

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.