# Orin rgmii no tx data

**URL:** <https://forums.developer.nvidia.com/t/orin-rgmii-no-tx-data/273866>\
**Category:** Jetson AGX Orin\
**Tags:** board-design, ethernet\
**Created:** [November 24, 2023, 1:55am UTC](https://forums.developer.nvidia.com/t/orin-rgmii-no-tx-data/273866 "2023-11-24T01:55:32Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [November 24, 2023, 3:42am UTC](https://forums.developer.nvidia.com/t/orin-rgmii-no-tx-data/273866/3 "2023-11-24T03:42:53Z")

</div>

Please check if this helps

> [@Jetson ORIN: RGMII can't send data](https://forums.developer.nvidia.com/t/jetson-orin-rgmii-cant-send-data/219006):
>
> Hello, I need to use orin’s RGMII interface in our custom board which attached a 88Q2112 phy. according to “Adaptation and Bringup for Jetson AGX Orin” deployment guide, I configured the pinmux link this and configured the device tree link this the eqos interface can bringup now, and the rx direction ( 88q2112-\>orin ) of this interface is good, but the tx direction is bad. do i need to do any other configuration? …

---

_[View the full topic](https://forums.developer.nvidia.com/t/orin-rgmii-no-tx-data/273866)._