Partitions on Onrin

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.4 SDK
DRIVE OS 6.0.4 (rev. 1)
other

Target Operating System
Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other

SDK Manager Version
1.8.3.10426
other (1.8.4.10431)

Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

Hello,

I have couple questions regarding to my Drive Orin storage:

Q1:
I see that my mounted partition is 32GB, however the m2 drive that installed is 256GB. I see that there are other partitions.
What are they used for? Is there another “mode” I can load the system?

Q2:
I want to upgrade to m2 capacity, however when I switch to a fresh drive and flash using sdkmanager, it fails at the end of the installation.
In logs I see that there was an access to tmp_global_storage_sub2.cfg, where I see couple different partition names, therefore I guess if I install a new drive that should be configured manually.

How do I configure a new m2 for flashing?

Please, see logs attached.

Thanks,
Nikolay
SDKM_logs_DRIVE_OS_6.0.4_SDK_(rev._1)_Linux_for_DRIVE_AGX_Orin_DevKits_2022-11-02_20-46-46.zip (1.9 MB)

Sorry for the late response, is this still an issue to support? Thanks

Dear @NikolayChernuha,
Q1. /dev/vblkdev3 is UFS . Please see
How to mount all areas of eMMC and UFS under Linux - #5 by SivaRamaKrishnaNV if it helps.
Q2. Looks similar to Drive os flashing on different drive and will be followed in that topic.

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.