# PhysX3CommonCHECKED\_x86.dll missing?

**URL:** <https://forums.developer.nvidia.com/t/physx3commonchecked-x86-dll-missing/31296>\
**Category:** Physics Modeling (closed)\
**Created:** [November 4, 2013, 11:18pm UTC](https://forums.developer.nvidia.com/t/physx3commonchecked-x86-dll-missing/31296 "2013-11-04T23:18:57Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![EricBowman](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@EricBowman](https://forums.developer.nvidia.com/u/EricBowman)\
**Post date:** [November 4, 2013, 11:18pm UTC](https://forums.developer.nvidia.com/t/physx3commonchecked-x86-dll-missing/31296/1 "2013-11-04T23:18:57Z")

</div>

I’m writing my first PhysX application and when I try to launch it I get the error:

"The program can’t start because PhysX3CommonCHECKED\_x86.dll is missing from your computer. Try reinstalling the program to fix this problem.

I have referenced the proper include and library directories and I have linked to:

PhysX3DEBUG\_x86.lib  
PhysX3CommonDEBUG\_x86.lib  
PhysX3ExtensionsDEBUG.lib

I read a forum post or two that talked about putting a few of the PhysX .dlls into your application’s bin folder, which would make sense if I was using C# I guess. but I’m using C++.

Thank you for your help!

---

<div class="post-metadata">

**Author:** ![EricBowman](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@EricBowman](https://forums.developer.nvidia.com/u/EricBowman)\
**Post date:** [November 5, 2013, 4:04pm UTC](https://forums.developer.nvidia.com/t/physx3commonchecked-x86-dll-missing/31296/2 "2013-11-05T16:04:16Z")

</div>

Copied all of the physX .dlls into my output directory and it fixed the problem.

The crazy thing is, I swear I did that before to no avail. But this time it worked. I’m probably just going crazy.

---

<div class="post-metadata">

**Author:** ![ScreenOfDeath](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@ScreenOfDeath](https://forums.developer.nvidia.com/u/ScreenOfDeath)\
**Post date:** [November 5, 2013, 9:38pm UTC](https://forums.developer.nvidia.com/t/physx3commonchecked-x86-dll-missing/31296/3 "2013-11-05T21:38:25Z")

</div>

Hi,

as the error message said, you should copy the dlls inside your bin folder.  
All you did is linked against the libs which need the dlls to run your application.

I guess in older PhysX Versions (like 2.8x or something else…) this could be possible,  
but I´m not sure about it. ( When I remember corretly, the PhysX Software contails all dlls  
for running these applications, so when you installed it, they are using the dlls from that.)

But your sentence about using the libs in C#: Funny, I lol´d :D  
No, sorry, you are not right here :D

The Physx Guide also tells you that you need to redistribute some dlls.  
Maybe you saw it in the samples too, the PhysX3Common\ __.dll and PhysX3\__.dll - will always be needed.  
Other dlls are needed when you are using them and linked against them.

But everybody had sometimes a bad day :D
