PIN definition for 3 trios Sensor on AGX

Autonomous Machines Jetson & Embedded Systems Jetson AGX Xavier
1

Hi, vendor:

There is a 3 trios sensor to be connected on AGX.

In driver porting guide , it reveals that we just need to specify the port we use and the lane numbers

It is enough for me to specify port0, lane numbers to be 3 in driver and connect sensor on pad A(2 trios ) and pad B(1 trios)?

It is not necessary to specify the every pins we use ?
(ex: CSI0_D0_N , CSI0_D0_P)

Thanks for suggestions

4

When 3-Trio mode is to be used, it has to be the first three Trios in the 4-Trio brick.

1 Like