Power Blink ON but OS not load

daherk2 · January 13, 2021, 5:18pm

Hi Folks!
I have this Jetson since Jan. 2020.
Last year I passed testing deep learning models, training, so studying the environment.
But this week when I returned on the Jetson, nothing happens… the power light is on but nothing happens, if I try to plug a mouse or a gpio, the peripherals appear turned off.
I also tried recreating the SD card, I downloaded again the sd image. But the issue persists.
Any idea about recovering??

Device Description:
Jetson nano
Model: P3450
SD card: SanDisk Ultra 64gb

linuxdev · January 13, 2021, 5:32pm

You will probably need to provide a serial console boot log. See:
https://www.jetsonhacks.com/2019/04/19/jetson-nano-serial-console/

Serial console will provide a lot of information and will work even if there are failures in video. Serial console even provides logs from before Linux ever starting. Simply seeing the LED won’t narrow down the issue.

daherk2 · January 13, 2021, 5:45pm

Thank you!!
Let me try to apply :-D

daherk2 · January 15, 2021, 9:42pm

Hi @linuxdev was able to get this :

https://pastebin.com/3aGhaESg

daherk2 · January 15, 2021, 9:58pm

[0000.125] [L4T TegraBoot] (version 00.00.2018.01-l4t-c536fca9)

[0000.131] Processing in cold boot mode Bootloader 2

[0000.135] A02 Bootrom Patch rev = 1023

[0000.139] Power-up reason: pmc por

[0000.142] No Battery Present

[0000.145] pmic max77620 reset reason

[0000.148] pmic max77620 NVERC : 0xc5

[0000.151] RamCode = 0

[0000.154] Platform has DDR4 type RAM

[0000.157] max77620 disabling SD1 Remote Sense

[0000.161] Setting DDR voltage to 1125mv

[0000.165] Serial Number of Pmic Max77663: 0x1907ef

[0000.173] Entering ramdump check

[0000.176] Get RamDumpCarveOut = 0x0

[0000.179] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8

[0000.184] Last reboot was clean, booting normally!

[0000.189] Sdram initialization is successful

[0000.193] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000

[0000.199] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000

[0000.205] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000

[0000.211] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000

[0000.217] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000

[0000.222] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000

[0000.228] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000

[0000.234] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000

[0000.250] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000

[0000.256] Platform-DebugCarveout: 0

[0000.259] Nck Carveout Base=0x00000000ff080000 Size=0x00200000

[0000.265] Non secure mode, and RB not enabled.

[0000.270] Read GPT from (4:0)

[0000.273] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.283] Command complete wait failed with error 0x3 Interrupt 0xc8000

[0000.289] Number of retries left 4

[0000.293] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.303] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.309] Number of retries left 3

[0000.313] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.323] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.329] Number of retries left 2

[0000.333] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.343] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.349] Number of retries left 1

[0000.353] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.363] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.369] Number of retries left 0

[0000.373] Send command failed with 0x3

[0000.376] CMD8 send failed. Retrying CMD0/CMD8 (2)…

[0000.381] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.392] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.398] Number of retries left 4

[0000.401] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.412] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.418] Number of retries left 3

[0000.421] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.432] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.438] Number of retries left 2

[0000.441] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.451] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.458] Number of retries left 1

[0000.461] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.471] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.478] Number of retries left 0

[0000.481] Send command failed with 0x3

[0000.485] CMD8 send failed. Retrying CMD0/CMD8 (1)…

[0000.490] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.500] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.506] Number of retries left 4

[0000.510] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.520] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.526] Number of retries left 3

[0000.530] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.540] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.546] Number of retries left 2

[0000.550] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.560] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.566] Number of retries left 1

[0000.570] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.580] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.586] Number of retries left 0

[0000.590] Send command failed with 0x3

[0000.593] CMD8 send failed. Retrying CMD0/CMD8 (0)…

[0000.598] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.608] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.615] Number of retries left 4

[0000.618] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.628] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.635] Number of retries left 3

[0000.638] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.648] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.655] Number of retries left 2

[0000.658] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.668] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.675] Number of retries left 1

[0000.678] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.688] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.695] Number of retries left 0

[0000.698] Send command failed with 0x3

[0000.701] CMD55 send failed with error 0x3 in SdIdentifyCard func at 1870 line

[0000.708] SD Identify card failed with 0x3

[0000.712] SdIdentifyCard has failed with error 0x3 in NvTbootSdmmcInit func at 87 line

[0000.720] Sdmmc Init failed with 0x3 error

[0000.724] Read PT from (2:0)

[0000.739] Using BFS PT to query partitions

[0000.743] PT: Partition TBC NOT found !

[0000.747] Warning: Find Partition via PT Failed

[0000.751] failed to load NvTbootTbootCpu from (4:0)

[0000.756] re-load NvTbootTbootCpu from (2:0)

[0000.760] Read GPT from (4:0)

[0000.763] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.774] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.780] Number of retries left 4

[0000.783] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.794] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.800] Number of retries left 3

[0000.803] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.814] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.820] Number of retries left 2

[0000.823] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.834] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.840] Number of retries left 1

[0000.843] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.854] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.860] Number of retries left 0

[0000.863] Send command failed with 0x3

[0000.867] CMD8 send failed. Retrying CMD0/CMD8 (2)…

[0000.872] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.882] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.888] Number of retries left 4

[0000.892] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.902] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.908] Number of retries left 3

[0000.912] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.922] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.928] Number of retries left 2

[0000.932] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.942] Command complete wait failed with error 0x3 Interrupt 0x18001

[0000.948] Number of retries left 1

[0000.952] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.962] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.968] Number of retries left 0

[0000.972] Send command failed with 0x3

[0000.975] CMD8 send failed. Retrying CMD0/CMD8 (1)…

[0000.980] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0000.991] Command complete wait failed with error 0x3 Interrupt 0x18000

[0000.997] Number of retries left 4

[0001.000] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.011] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.017] Number of retries left 3

[0001.020] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.031] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.037] Number of retries left 2

[0001.040] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.051] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.057] Number of retries left 1

[0001.061] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.071] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.077] Number of retries left 0

[0001.080] Send command failed with 0x3

[0001.084] CMD8 send failed. Retrying CMD0/CMD8 (0)…

[0001.089] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.099] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.105] Number of retries left 4

[0001.109] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.119] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.125] Number of retries left 3

[0001.129] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.139] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.145] Number of retries left 2

[0001.149] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.159] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.165] Number of retries left 1

[0001.169] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.179] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.185] Number of retries left 0

[0001.189] Send command failed with 0x3

[0001.192] CMD55 send failed with error 0x3 in SdIdentifyCard func at 1870 line

[0001.199] SD Identify card failed with 0x3

[0001.203] SdIdentifyCard has failed with error 0x3 in NvTbootSdmmcInit func at 87 line

[0001.211] Sdmmc Init failed with 0x3 error

[0001.215] PT: Partition TBC NOT found !

[0001.218] Warning: Find Partition via PT Failed

[0001.223] Read GPT from (4:0)

[0001.226] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.236] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.243] Number of retries left 4

[0001.246] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.256] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.263] Number of retries left 3

[0001.266] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.276] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.283] Number of retries left 2

[0001.286] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.296] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.303] Number of retries left 1

[0001.306] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.316] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.323] Number of retries left 0

[0001.326] Send command failed with 0x3

[0001.330] CMD8 send failed. Retrying CMD0/CMD8 (2)…

[0001.335] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.345] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.351] Number of retries left 4

[0001.355] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.365] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.371] Number of retries left 3

[0001.375] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.385] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.391] Number of retries left 2

[0001.395] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.405] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.411] Number of retries left 1

[0001.415] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.425] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.431] Number of retries left 0

[0001.435] Send command failed with 0x3

[0001.438] CMD8 send failed. Retrying CMD0/CMD8 (1)…

[0001.443] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.453] Command complete wait failed with error 0x3 Interrupt 0x18001

[0001.460] Number of retries left 4

[0001.463] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.473] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.480] Number of retries left 3

[0001.483] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.493] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.500] Number of retries left 2

[0001.503] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.513] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.520] Number of retries left 1

[0001.523] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.534] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.540] Number of retries left 0

[0001.543] Send command failed with 0x3

[0001.547] CMD8 send failed. Retrying CMD0/CMD8 (0)…

[0001.552] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.562] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.568] Number of retries left 4

[0001.572] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.582] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.588] Number of retries left 3

[0001.592] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.602] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.608] Number of retries left 2

[0001.612] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.622] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.628] Number of retries left 1

[0001.632] Error mask set in wait for cmd complete with error 0x3 in HwSdmmcWaitForCommandComplete func at 278 line

[0001.642] Command complete wait failed with error 0x3 Interrupt 0x18000

[0001.648] Number of retries left 0

[0001.652] Send command failed with 0x3

[0001.655] CMD55 send failed with error 0x3 in SdIdentifyCard func at 1870 line

[0001.662] SD Identify card failed with 0x3

[0001.666] SdIdentifyCard has failed with error 0x3 in NvTbootSdmmcInit func at 87 line

[0001.674] Sdmmc Init failed with 0x3 error

[0001.678] PT: Partition TBC NOT found !

[0001.681] Warning: Find Partition via PT Failed

[0001.686] Error is 1

linuxdev · January 16, 2021, 6:30pm

There are lots of errors reading the SD card. I could not tell you if this is an electrical failure, or simply something software could correct, but it looks like an electrical failure.

As an experiment remove the SD card, and see if the green LED remains on instead of blinking off. If the LED remains on, then I’d say some interaction with the SD card is the issue.

If this is an SD card issue, then if you can try a different SD card do so. Since the system used to work with that SD card, but no longer does, I will assume that for the case of power remaining on without an SD card that the SD card itself has failed. For the case of power blinking off even when there is no SD card, then odds are that there is a hardware failure for the carrier board.