What I can suggest here is you buy a Orin Nano devkit and use that new carrier board to flash the module.
As I checked with hardware folks, there is no workaround.
Understood. Thanks for your help. I’ll check around the office and see if anybody has an Orin Nano devkit I can borrow.
I will also talk to the vendor and see if they are willing to take the kit back and re-flash themselves (they may have other carrier boards on hand they can use).
Please keep this thread open while I look into getting a kit. :)
I have shipped the car back to the vendor. They’ll take a look at it and see if they have another carrier board they can use to re-flash the firmware.
1 Like
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.