problem on running examples cuda instalation problem

Hi all !

I am a new with cuda, i have a GeForce 6200 card (with opensuse10.2).
I installed the driver

  • when I run any example, I get:
    There is no device supporting CUDA.

  • and deviceQuery gives:
    There is no device supporting CUDA.

Device 0: “Device Emulation (CPU)”
Major revision number: -1
Minor revision number: -1
Total amount of global memory: -1 bytes
Total amount of constant memory: 65536 bytes
Total amount of shared memory per block: 16384 bytes
Total number of registers available per block: 8192
Warp size: 32
Maximum number of threads per block: 512
Maximum sizes of each dimension of a block: 512 x 512 x 64
Maximum sizes of each dimension of a grid: 65535 x 65535 x 1
Maximum memory pitch: 262144 bytes
Texture alignment: 256 bytes
Clock rate: 1350000 kilohertz


Press ENTER to exit…

so, if anyone has an idea ;) ! (my global memory set to 0 is at least one problem i guess …)

Probably, you just need to do a reboot.

Are you sure your video card is recognized by the kernel? CHeck “dmesg” output to see if NVIDIA card is detected.

btw, Are you sure GEforce 6200 is CUDA capable? I have no idea. But please do a check

You need GeForce8-ased card, i.e. GeForce 8xxx.

CUDA won’t work on 6200.

you are right, with my card i only can need use the emulation mode …
so i compiled with the option emu=1 and it s running !