Problem with camera in CSI G port on xavier NX

Modify below port-index to 5 in the VI and sensor scope but don’t in NVCSI scope.

				vi_port5: port@5 {
					status="okay";
					reg = <5>;
					ov9281_vi_in5: endpoint {
						status="okay";
						port-index = <6>;
						bus-width = <2>;
						remote-endpoint = <&ov9281_csi_out5>;
					};
				};	
			
..
..
..
						port@0 {
							reg = <0>;
							status="okay";
							ov9281_out5: endpoint {
								status="okay";
								port-index = <6>;
								bus-width = <2>;
								remote-endpoint = <&ov9281_csi_in5>;
							};