Problem with multiflashing Jetson TX2

Autonomous Machines Jetson & Embedded Systems Jetson TX2
#1

With README_Massflash.txt , I created an archive mfi_jetson-tx2.
Flash two jetson TX2, it’s ok. When flashing three boards, one of them disconnected.

The aborted log is following:

*** Boot Rom communication
/home/engineer/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_TX2/mfi_jetson-tx2/tegrarcm_v2 --instance 1-3 --chip 0x18 0 --rcm rcm_list_signed.xml
BR_CID: 0x81801001646482c51c00000018ff0180
RCM version 0X180001
Boot Rom communication completed
*** Boot Rom communication succeeded.

*** Checking applet
/home/engineer/nvidia/nvidia_sdk/JetPack_4.3_Linux_JETSON_TX2/mfi_jetson-tx2/tegrarcm_v2 --instance 1-3 --isapplet
No device on specified bus-port[1-3]
USB communication failed.Check if device is in recovery
*** Error: Checking applet failed.

Host Ubuntu 18.04. JetPack 4.3

#3

hello hotspear89,

please refer to Topic 158896 for the fixes of multi-flash.
thanks

#5

Thanks, it’s work.
Another question. I’m use custom kernel (-K ) and orbity [CTI-L4T-TX2-32.3.1-V003) at ./flash.sh. How can i use them when massflashing?

#6

hello hotspear89,

I’m not sure what’s your image type of orbity (CTI-L4T-TX2-32.3.1-V003)
please note that, flash script using the binaries under $OUT/Linux_for_Tegra/kernel/* to flash the board.
you may replace your customize images for flashing.
thanks

#7

Theoretically, I can replace jetson-tx2.conf in orbity.conf. Will it work?