Problems flashing TK1

while attempting to run the latest installer and update my TK1 I get two errors at the nvflash line

from the log
./nvflash --bct PM375_Hynix_2GB_H5TC4G63AFR_RDA_924MHz.cfg --setbct --configfile flash.cfg --create --bl fastboot.bin --odmdata 0x6009C000 --go
Error parsing: SDRAM[0].PllMSetupControl=0x00000000

If I comment out the PIIM line, I get another parsing error
Error parsing: SDRAM[0].PllMSelectDiv2=0x00000000

And this continues. I’ve commented about at least 20 options and after getting to the end of the file start getting errors like this
Error: Config file doesn’t have parameters for SDRAM[0].PllMChargePumpSetupControl.

I’ve definitely got something wrong with the way this config was generated, but the installer tool did this all automagically up to this point. Do I need to regenerate my config for a different hardware platform?

Which L4T version are you using…R19.3 or R21.2? What was your exact script command? FYI, for Jetson the platform is always “jetson-tk1”…other platforms need different targets.