Use CMD
./tools/kernel_flash/l4t_initrd_flash.sh --no-flash jetson-agx-orin-devkit internal
./tools/kernel_flash/l4t_initrd_flash.sh --flash-only jetson-agx-orin-devkit internal
Find error message …
No known UDC device found
flash-only-oem-cmd-err.log (10.8 KB)
flash-only-oem-tty-err.log (61.3 KB)
I found similar questions
Use flash command is ok:
./flash.sh jetson-agx-orin-devkit internal
flash-oem-cmd-ok.log (105.2 KB)
flash-oem-tty-ok.log (110.4 KB)
There is a difference between the flashing USB port of my board and the EVK.
my board flashing USB port(USB 2.0_0) directly connected to USB type C ..
so dts disable CYPRESS_CCG_EN
tegra234-p3737-0000+p3701-0000.zip (2.8 KB)