I would like to ask if it’s possible to read out raw bytes (or bits) from the CSI interface. I want to use the interface to read out values from http://www.ti.com/lit/ds/symlink/afe5801.pdf Plan is to process the bits (or bytes) in CUDA and avoid using FPGA+GbE eth as MITM for interfacing.

Read out raw values from CSI bus

Trumany July 6, 2017, 8:21am 4

No such way for that.

Topic		Replies	Views
Tx2 CSI grab data from FPGA without I2c Jetson TX2	16	1269	October 18, 2021
Jetson AGX Xavier 4 CSI RAW Input From FPGA Jetson AGX Xavier camera	64	1746	April 15, 2024
Configuration for raw data over CSI Jetson AGX Xavier camera	18	2033	November 4, 2021
Interface lattice cpld CSI TX TO JTK1 csi interface Jetson TK1	2	943	October 18, 2021
Jetson TX2 CSI port interfacing Jetson TX2	7	3438	October 18, 2021
Read CSI Register on Jetson Tx2 Jetson TX2 camera	19	3220	October 18, 2021
HDMI FPGA to TX2 MIPI CSI Jetson TX2 camera	36	3970	October 18, 2021
No CSI traffic is received from CSI custom sensor Jetson AGX Xavier camera	13	935	December 22, 2021
Radar data through MIPI CSI-2 interface without I2C - Device-tree issues Jetson Nano camera , device-tree , csi	41	236	July 1, 2025
Jetson Xavier NX MIPI CSI-2 without I2C from TC358768 Jetson Xavier NX camera	2	1165	July 23, 2021