Reboot can not restart system:

[wilicyy]

hello,
i updated jetson xavier nx to jetpack 5.0.2 recently and tested, found two issues right now.

1. when i input reboot command, sometimes it can not restart system, light is ok on board, but no ethernet lighting. it seems board is standby. i think that’s a system serious bug, pls give some advices for it urgently.
   that happens many times in fact.

2. i updated 3 NX by SD images. two NX is ok and runs well. but another one shows the warning: test key is using. but it can enter system to work. where is different?

thank you very much!

[kayccc]

@wilicyy

warning: test key is using

Is this warning showed loaded the image that you compiled from sources?
Or it’s from the SD image we provided?

If it’s from compile source, please refer to Orin Desktop version issue - #13 by dimaz

If it’s from SD image, suggest to do the full reflash by JetPack via the SDK manager to see if issue still presented.

[wilicyy]

i used SD image provided by nvidia.

[kayccc]

Please do the full reflash by JetPack via the SDK manager to see if issue still presented.

[wilicyy]

ok i will try that.
and how about reboot questions which my the first question?

thank you

[WayneWWW]

You should dump the log from serial console for your first issue and share log.

Jetson Nano Style - Serial Console - JetsonHacks