Hi Omar,
Greetings!
Please list the o/p of “pactl list sources short”. Want to check the card number where the respeaker is registered
Please have a look at ReSpeaker USB Mic Array not available as an input device in sound settings - #11 by atalambedu where they were able to record using arecord
Further, pls mention the arecord command used and o/p of cat /proc/asound/cards
- Is there an officially recommended setup for ReSpeaker on Jetson Orin Nano?
We dont recommend setup for specific USB sound cards on Jetson Orin Nano as its plug and play usually. But if there are any S/W driver related errors, we help resolving them. But in this case, looks like usb sound card registration went through fine. So I doubt if there will be any Linux USB Kernel driver issues.
- Are there alternative firmware versions that might fix this issue?
Regarding fimware versions, can you elaborate on who provided the initial version and what is the rols of firmware. Seeed ReSpeaker? They may be able to provide info regarding firmware
- Any manual configurations required for PulseAudio/ALSA on Jetson devices?
A few configurations wrt third party pulse audio tool is given on referred query. ReSpeaker USB Mic Array not available as an input device in sound settings - #11 by atalambedu. Please have a look and see if it helps. If it does not, you may have to consult on pulse audio Q & A forum or try upgrading to pipewire if you are using advanced ubuntu version
Warm regards