[myatkaung] Hi Once I plug in my adapter, I saw this picture and don’t know how to proceed next step. Pls suggest with that issue. Thank you.

If you want to get boot logs from before the Linux kernel loads (and you do), then you must have the serial UART. These are actually fairly inexpensive, just make sure it uses 3.3V TTL levels. If your Arduino serial monitor is 3.3V, then it will work. If not 3.3V, then you’ll need a different adapt…

Saw this Screen and don't know how to solve

Autonomous Machines Jetson & Embedded Systems Jetson Nano

WayneWWW July 11, 2021, 3:26am 3