SD card issues with Auvidea's carrier board

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX
#1

I’ve contacted Auvidea, but since they haven’t answered yet I’m curious if any of you have had the same issue and know a fix.

I’m using the JNX30-PD carrier board.
The SD card is not visible to the NX.
I’ve tried inserting it before and after boot.
df, fdisk and gdisk doesn’t detect the card.
Programs like ‘Disk Usage Analyzer’ and ‘Disks’ doesn’t detect it.

#3

Hi jakob.lunde,

Please contact with Auvidea support: https://auvidea.eu/support/

#5

To quote myself:

I’ve contacted Auvidea, but since they haven’t answered yet I’m curious if any of you have had the same issue and know a fix.

I agree that product issues should be taken with the product’s company, but since they are slow to respond, and I know that the community here is more active, I’m asking on this forum as well.

#6

Would you share kernel logs?

#7

I’ll see if I can do that tomorrow.
Is there anything in particular you are interested in in those logs?

#8