sdkmanager (Jetson Nano) Flash Jetson OS crashes at 3.1%

sdkmanager (for Jetson Nano) always crases at 3.1% during Flash of Jetson OS.
J40 (pins 3 and 4) and J48 connections are in-place.
cd ~/nvidia/nvidia_sdk/JetPack_4.2_Linux_P3448/Linux_for_Tegra
sudo ./flash.sh jetson-nano-qspi-sd mmcblk0p1
###############################################################################
# L4T BSP Information:
# R32 (release), REVISION: 1.0, GCID: 14531094, BOARD: t210ref, EABI: aarch64,
# DATE: Wed Mar 13 07:46:13 UTC 2019
###############################################################################
Error: probing the target board failed.
Make sure the target board is connected through
USB port and is in recovery mode.
lsusb | grep NVidia
Bus 001 Device 003: ID 0955:7f21 NVidia Corp.

References:
“Jetson device is in recovery mode” message during SDK components installation https://devtalk.nvidia.com/default/topic/1050668/jetson-nano/-quot-jetson-device-is-in-recovery-mode-quot-message-during-sdk-components-installation/
SDK Manager - Flash Jetson OS issues - device is not in recovery mode https://devtalk.nvidia.com/default/topic/1050065/jetson-nano/sdk-manager-flash-jetson-os-issues-device-is-not-in-recovery-mode/

Hi Bobka,

Are you connect micro-usb to host via usb hub?
If yes, please try to connect usb port directly or try another usb port and usb cable.
Thanks!

Hi carolyuu! Please close this topic.

[solved] Ubuntu 18.04 LTS is running on my notebook with VMware Workstation 15 Player and Windows 10.
Several posts state that “Using a VM [for flushing] is not supported.”
This gave me a glue how to fix the issue with following changes in VMware Player settings:

  1. Player >File >Preferences… >USB
    When a new device is detected, VMware Player should:
    (o) Connect the device to the running virtual machine
  2. Player >Manage> Virtual Machine Settings… >Hardware >USB Controller >USB compatibility: USB 2.0