Incidentally, if you have the fuses burned with a key, then the kernel can only be loaded from a correctly signed kernel partition. Flash itself puts the kernel into the partition if you adjust the flash to use your key and if that key matches the burned fuses.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Secure boot on Jetson Orin Nano 4GB-DRAM (P3767-0004) board not booting [part 2] | 8 | 89 | February 20, 2025 | |
| Secure boot step-by-step on Jetson Orin Nano (P3767-0005) | 2 | 69 | May 14, 2025 | |
| Implement Jetson Secure Boot without UEFI Secure Boot on Jetson AGX Orin | 8 | 300 | October 8, 2024 | |
| Enable secure boot without fusing SOM | 6 | 28 | August 15, 2025 | |
| [L4T 35.4.1] How to get both UEFI SecureBoot and burning software fuses | 7 | 384 | May 22, 2024 | |
| Jetson Secure Boot and Fused Board Support Package (R36.4.4) | 5 | 41 | July 14, 2025 | |
| Host required for secure on Jetson orin nano dev kit | 14 | 89 | February 12, 2025 | |
| Questions about Orin Secure Boot | 2 | 329 | June 24, 2024 | |
| Secure Boot on Jetson Orin Nano with Yocto/meta-tegra: FSKP vs. odmfuse.sh | 5 | 88 | June 9, 2025 | |
| [L4T 35.4.1] How to verify is SecureBoot is running | 10 | 552 | April 23, 2024 |