Setup AGX Orin without USB-C connection

Autonomous Machines Jetson & Embedded Systems Jetson AGX Orin
1

Hi all,

I am currently trying to setup a system with an AGX Orin 32GB module. I am using a custom carrier board which only provides me with a USB-A 2.0 and an HDMI port. This leads me to not being able to flash via USB-C.

How can I proceed here with flashing the board? I am thinking about directly flashing to the NVMe storage that is mounted on the carrier board but I can’t figure out how I can do this without needing to afterwards connect the board via USB-C to set it up…

Do you have any idea on how to easily flash the system?

Thanks a lot,
David

2

Hi,

Did you make this custom board or it is from some vendor…?

3

Hi Wayne,

thanks for the fast reply. The board comes from Auvidea and is called X400.

4

Please contact with the board vendor. They should provide a method/customized BSP to flash the board.

5

Ok, thanks! I will try to get their feedback on that.

6

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.