Hi , im having an encoder with SPI which operates with 5V logic levels , but the SPI on the Jetson nano is only 3,3V so im not able to communicate with the encoder. Is there any way to convert the 3,3V and the 5V so that i can read the sensor with the jetson nano ?

SPI Level Shifter from 3,3V to 5V

gtj August 11, 2021, 10:16pm 2

Any common level shifter like the TXS0108E will work.

Topic		Replies	Views
Nano SPI level from 1.8V to 3.3V Jetson Nano	4	1127	October 14, 2021
SPI noisy signal when connected to level shifter Jetson Nano spi	2	732	November 10, 2021
Regarding SPI MOSI/ MISO voltage levels in Jetson Nano Jetson Nano spi	16	1771	March 17, 2022
Drive 1.8v SPI by disabling TI TXB0108 level translators? - Developer Board Jetson Xavier NX board-design	2	684	October 10, 2021
Does anyone have any suggestions for level shifters? Jetson Nano hw	41	5297	October 18, 2021
GPIO Input Signal Help (Jetson Nano) Jetson Nano	4	2886	October 14, 2021
SPI bus voltage level issue - MISO Jetson Nano spi , hw	7	1766	October 15, 2021
What's the voltage of SPI pins and I2C pins in J41 of Jetson Nano dev kit ? Jetson Nano	2	1493	December 13, 2019
Gpio with a level of 1.8v Jetson Nano gpio	6	932	October 18, 2021
Carrier output current 20uA Jetson Nano board-design	4	1346	October 21, 2021