The pins pass through a 1.8V to 3.3V level shift on carrier board.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Jetson AGX Orin Use the UART4_RX pin | 27 | 2492 | April 26, 2023 | |
| GPIO output remains high when using UART RTS on Jetson AGX Xavier | 2 | 529 | January 19, 2022 | |
| Jetson AGX orin CAMERA GPIO dhange to UART | 6 | 53 | August 13, 2024 | |
| Configuration for UART1_TXD (40 pin header pin8) to GPIO pin | 6 | 928 | October 18, 2021 | |
| Uart0_rts gpio pinmux | 3 | 480 | October 15, 2021 | |
| GPIO19 can not output high level. | 6 | 2002 | October 18, 2021 | |
| Keep `uart1_tx` low at boot | 5 | 655 | March 23, 2023 | |
| AGX, UART2_RTS pin configuration | 2 | 432 | November 2, 2022 | |
| Use the UART0_TXD, UART0_RTS pin as GPIO after booting | 2 | 848 | October 18, 2021 | |
| how to locate pins UART5_TX J58 UART5_RX H58 ? | 33 | 2371 | February 25, 2020 |