System throttled due to over-current on TX2 NX

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

Hello,

I have the same trouble than this post: System throttled due to over-current? - #74 by f.zappardino

This post is for the same problem on TX2 NX, instead of Xavier NX.

The workaround based on only crit_current_limit_0 is not working. The only crit_current_limit_0 I found is in another place:
/sys/devices/3180000.i2c/i2c-2/2-0040/iio:device0/crit_current_limit_0

Is it safe to write to this file?
Is there any other workaround for TX2 NX ?

Best regards

3

please refer to this topic, Throttled overcurrent on TX2NX 4.6
user has confirmed this did not happen on devkit carrier board.