我们在自研一块T5000的载板，在USB OTG口的引脚检测上，想沿用OrinNX的设计用一个i2c来实现。软件基于Jetpack7.2。请问这个移植需要改动哪些代码和设备树？
WayneWWW
2
please refer to document.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Usb2-0 修改otg为主模式 | 2 | 806 | September 14, 2023 | |
| How to realize usb otg when use Jetpack 5.1 | 8 | 771 | May 18, 2023 | |
| Tx2i -Usb0 of customized carrier board cannot work normally, and OTG cannot be used normally | 30 | 1240 | May 25, 2022 | |
| Configuring otg mode for usb2-0 | 15 | 211 | July 22, 2026 | |
| Configure the type-c port to OTG with OTG_ID | 54 | 1261 | August 14, 2024 | |
| Jetson Orin NX usb 2.0 VBUS | 3 | 95 | December 21, 2025 | |
| Use USB0 as host usb on Orin NX custom carrier board(JP 5.1.2) | 53 | 1701 | May 14, 2024 | |
| How to enable otg on J39 usb port? | 4 | 1065 | March 15, 2023 | |
| Force debug USB to device mode | 2 | 179 | October 9, 2025 | |
| How to use USB0 as OTG in Device and Host Mode without changing device tree after flashing? | 11 | 3536 | August 3, 2023 |