TC358743 on Jetson Orin NX with Jetpack 5.x

[JerryChang]

hello emadomari40,

there’re some popular topics for your reference.

HDMI Camera - ADV7480 - CSI - ORIN NX

Where do I find documentation for custom carrier adaptation of the following scenario: HDMI Camera connected to ADV748x connected to CSI interface for an ORIN NX. The official documentation mentions tegra194-camera-imx185-a00.dtsi I also found the tegra194-camera-imx274-hdmi.dtsi that might be helpful. Are these the right files for ORIN NX? Is there a use-case example? 5.1.1 ORIN NX 16GB Thank you.

Orin Nano and tc358743 capture issue

I’m getting the "vi_capture_control_message: NULL VI channel received " error when I try to capture from either of my tc358743’s connected to my Orin Nano on Xavier NX DevKit. I’ve tried to find a solution in the forum but haven’t found an actual answer or one that was relevant to Orin and tc358743. The OS was built from SDK Manager using JetPack 5.1.2 on Jetson Orin Dev board, L4T 35.4.1 cat /etc/nv_tegra_release # R35 (release), REVISION: 4.1, GCID: 33958178, BOARD: t186ref, EABI: aarch64,…

Guide to have TC358743 B102 board running on Jetson Nano Developer Kit

Hello, Recently I received a Jetson Nano Developer Kit (I believe it is the B01 board), an Auvidea B102 CSI-HDMI interface and the mission to have the HDMI interface to run on the board. I saw on the forums lots of messages about the subject, and I understand that this was a discussion done quite some time ago. I read (probably) all of them and tried to have it working on my setup. No success. The driver starts, I can see I2C communication happening, but the acquisition never happened. Is th…