# Testing custom camera with Jetson Tx2

**URL:** <https://forums.developer.nvidia.com/t/testing-custom-camera-with-jetson-tx2/116731>\
**Category:** Jetson TX2\
**Tags:** camera\
**Created:** [March 23, 2020, 10:46am UTC](https://forums.developer.nvidia.com/t/testing-custom-camera-with-jetson-tx2/116731 "2020-03-23T10:46:22Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![jpchae](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@jpchae](https://forums.developer.nvidia.com/u/jpchae)\
**Post date:** [March 25, 2020, 5:32am UTC](https://forums.developer.nvidia.com/t/testing-custom-camera-with-jetson-tx2/116731/12 "2020-03-25T05:32:42Z")

</div>

Hi ShaneCCC,

i’m try to test v4l2-ctl as your advise.  
but i’m in trouble with how to debugging to modified parameter.

**device-tree property parameters changed active\_w, active\_h,mclk\_multiplier, but still streaming error is not fixed.**

here is v4l2-ctl message.

```
 jpchae@jpchae-desktop:~/Downloads$ v4l2-ctl --all -d /dev/video0 
Driver Info (not using libv4l2):
	Driver name : tegra-video
	Card type : vi-output, s5k5e8 2-0018
	Bus info : platform:15700000.vi:2
	Driver version: 4.9.140
	Capabilities : 0x84200001
		Video Capture
		Streaming
		Extended Pix Format
		Device Capabilities
	Device Caps : 0x04200001
		Video Capture
		Streaming
		Extended Pix Format
Priority: 2
Video input : 0 (Camera 2: no power)
Format Video Capture:
	Width/Height : 2608/1960
	Pixel Format : 'BA10'
	Field : None
	Bytes per Line : 5376
	Size Image : 10536960
	Colorspace : sRGB
	Transfer Function : Default (maps to sRGB)
	YCbCr/HSV Encoding: Default (maps to ITU-R 601)
	Quantization : Default (maps to Full Range)
	Flags : 

Camera Controls

                     group_hold 0x009a2003 (bool) : default=0 value=0 flags=execute-on-write
                           gain 0x009a2009 (int64) : min=0 max=0 step=0 default=0 value=0 flags=slider
                       exposure 0x009a200a (int64) : min=0 max=0 step=0 default=0 value=16000 flags=slider
                     frame_rate 0x009a200b (int64) : min=0 max=0 step=0 default=0 value=20000000 flags=slider
                    bypass_mode 0x009a2064 (intmenu): min=0 max=1 default=0 value=0
                override_enable 0x009a2065 (intmenu): min=0 max=1 default=0 value=0
                   height_align 0x009a2066 (int) : min=1 max=16 step=1 default=1 value=1
                     size_align 0x009a2067 (intmenu): min=0 max=2 default=0 value=0
               write_isp_format 0x009a2068 (int) : min=1 max=1 step=1 default=1 value=1
       sensor_signal_properties 0x009a2069 (u32) : min=0 max=0 step=0 default=0 flags=read-only, has-payload
        sensor_image_properties 0x009a206a (u32) : min=0 max=0 step=0 default=0 flags=read-only, has-payload
      sensor_control_properties 0x009a206b (u32) : min=0 max=0 step=0 default=0 flags=read-only, has-payload
              sensor_dv_timings 0x009a206c (u32) : min=0 max=0 step=0 default=0 flags=read-only, has-payload
               low_latency_mode 0x009a206d (bool) : default=0 value=0
                   sensor_modes 0x009a2082 (int) : min=0 max=30 step=1 default=30 value=2 flags=read-only

jpchae@jpchae-desktop:~/Downloads$ v4l2-ctl -L -d /dev/video0 

Camera Controls

                     group_hold 0x009a2003 (bool) : default=0 value=0 flags=execute-on-write
                           gain 0x009a2009 (int64) : min=0 max=6 step=1 default=6 value=0 flags=slider
                       exposure 0x009a200a (int64) : min=16000 max=30088 step=1 default=30088 value=16000 flags=slider
                     frame_rate 0x009a200b (int64) : min=20000000 max=30000000 step=1 default=30000000 value=20000000 flags=slider
                    bypass_mode 0x009a2064 (intmenu): min=0 max=1 default=0 value=0
				0: 0 (0x0)
				1: 1 (0x1)
                override_enable 0x009a2065 (intmenu): min=0 max=1 default=0 value=0
				0: 0 (0x0)
				1: 1 (0x1)
                   height_align 0x009a2066 (int) : min=1 max=16 step=1 default=1 value=1
                     size_align 0x009a2067 (intmenu): min=0 max=2 default=0 value=0
				0: 1 (0x1)
				1: 65536 (0x10000)
				2: 131072 (0x20000)
               write_isp_format 0x009a2068 (int) : min=1 max=1 step=1 default=1 value=1
       sensor_signal_properties 0x009a2069 (u32) : min=0 max=4294967295 step=1 default=0 [30][18] flags=read-only, has-payload
        sensor_image_properties 0x009a206a (u32) : min=0 max=4294967295 step=1 default=0 [30][16] flags=read-only, has-payload
      sensor_control_properties 0x009a206b (u32) : min=0 max=4294967295 step=1 default=0 [30][36] flags=read-only, has-payload
              sensor_dv_timings 0x009a206c (u32) : min=0 max=4294967295 step=1 default=0 [30][16] flags=read-only, has-payload
               low_latency_mode 0x009a206d (bool) : default=0 value=0
                   sensor_modes 0x009a2082 (int) : min=0 max=30 step=1 default=30 value=2 flags=read-only

```

also i read the web-page “[Jetson TX2 Camera BringUp - eLinux.org](https://elinux.org/Jetson_TX2_Camera_BringUp)”  
I don’t understand what that mean to trace data.  
**could you be more specific know me how to debugging changing parameter.**

---

_[View the full topic](https://forums.developer.nvidia.com/t/testing-custom-camera-with-jetson-tx2/116731)._
