The board resetting constantly

Hi all,
I have a problem with constantly resetting the board.
I think that I erased UCB_BMHD1 configuration and now I’m unable to edit it or to write new configuration:
https://imgur.com/gvx0f3w

UCB_BMHD0 configuration:

https://imgur.com/d9zscDc

I also tried to flash aurix5.1.0 image and during the flashing of DRIVE-V5.1.0-E3550-NV-Aurix-UPDATE-StepA-1.29.00.hex I get the following error:

https://imgur.com/Bvf7utB

If anyone can help me out here, that would be much appreciated :)

Thanks!

Dear nikola.ostojic,
Could you check flashing latest DRIVE SW (i.e. DRIVE SW 10.0) on your platform and see if it fixes the issue.