I’m using the IMX477 to capture video at 30 Hz in a gstreamer pipeline with the nvarguscamerasrc plugin. The time stamps on the video frames show quite a lot of jitter - the average length is 33 ms as expected, but there’s a wide distribution - some timestamps are off by more than a half-frame: 001…

For the sync frame suggest get the timestamp from the MMAPI like below topic. [image] Keeping camera synchronization at software level Jetson AGX Xavier Hi, we have a system based on a Xavier SoC and a GMSL deserializer to read from two independent cameras. Whenever one …

Timing jitter using camera through libargus

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

ShaneCCC June 21, 2022, 3:17am 10

For the sync frame suggest get the timestamp from the MMAPI like below topic.