您好,我们现在想进行NANO的百兆以太网物理层一致性测试,需要发测试码型,请问如何操作呢
您好,我看这个主要是测试网口的吞吐量性能的,我们需要测试物理网口的一致性,需要配置寄存器发送一致性测试码型,这个请问有么
Please refer to SW test tool for testing &measure USB2.0,USB 3.0 and LAN signal - Jetson & Embedded Systems / Jetson Nano - NVIDIA Developer Forums
请问这个里面的***代表什么意思呢?
Please refer to below tuning guide for Ethernet compliance test setup.
Jetson Nano Interface Tuning and Compliance Guide Application Note
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.